jagan13
02-18 09:58 AM
I am currently waiting for my renewed passport from Washington DC embassy, which I had mailed them on Dec 30th(signed for and received by them on Dec 31st). The passport is due to expire in Oct 2011. My problem is, my drivers license is expiring on Feb 24th as is my stamped visa. My employer has filed for my H1b extension and I currently have the original receipt notice needed for renewing my license. But, I cannot renew it without the original passport. I have been trying to reach them through phone as well as email for over 10 days now. Also, when filling out the form , I have a different permanent Indian address than what I had on the passport as my family back home had moved. The following are my questions:
1) Does this increase the processing time, due to any verification of address in India?
2) Has anybody been in the same situation and if yes, how long did it take for the embassy to renew and mail the passport?
3) Does anybody have a point of contact at the Embassy?
NOTE: I just talked to my bank and confirmed that the cashiers checks I had send along with the application have been cashed on Jan 24th. I dont know where that puts me on the timeline for receving my passport.
I have been looking at other threads on the forum and looks like it is typically taking 40 days for people to receive their passports in the mail. But , my license situation is concerning as I do not know, at what stage of renewal process my passport is in and how much longer I have to wait. Any insight will be greatly appreciated.
Thanks,
Jagan
1) Does this increase the processing time, due to any verification of address in India?
2) Has anybody been in the same situation and if yes, how long did it take for the embassy to renew and mail the passport?
3) Does anybody have a point of contact at the Embassy?
NOTE: I just talked to my bank and confirmed that the cashiers checks I had send along with the application have been cashed on Jan 24th. I dont know where that puts me on the timeline for receving my passport.
I have been looking at other threads on the forum and looks like it is typically taking 40 days for people to receive their passports in the mail. But , my license situation is concerning as I do not know, at what stage of renewal process my passport is in and how much longer I have to wait. Any insight will be greatly appreciated.
Thanks,
Jagan
wallpaper Map of the Silk Road in the
Bpositive
08-21 03:33 PM
lots of opinions/answers for your qns...
thomachan72
05-12 09:53 AM
Dear All,
Could you please advise, if we can port eb3 to eb2.
My husband is working for the same employer for last 6 years. He has masters degree from US and he filed for his GC in 2004. In 2004, he had only 1 year experience. The lawyer said he does not qualify for Eb2 despite his US degree.
Now after 6 years, he had a job change within his company. He became a principal engineer from just an engineer. Could we port to EB2?
If yes, what should we be careful about and how should we go about it?
Sincerely,
Augustus
In principle the main criteria would be whether the job requires a person with a masters or higher degree. If the company can prove that the job description and requirements match that for a person with masters then he would qualify. Again this is based on my awareness from reading various posts on the IV and similar websites. The attorney would be the best to decide. I know many of our friends in the IV have masters but the main problem they are facing is that the job description does not specify a masters. So the employer hesitates to reaply in EB2 catagory. If your husband fits in then I believe all he has to do is to file another 140 and port the PD of the EB3 application.
How frustating this can be, right? :(
Could you please advise, if we can port eb3 to eb2.
My husband is working for the same employer for last 6 years. He has masters degree from US and he filed for his GC in 2004. In 2004, he had only 1 year experience. The lawyer said he does not qualify for Eb2 despite his US degree.
Now after 6 years, he had a job change within his company. He became a principal engineer from just an engineer. Could we port to EB2?
If yes, what should we be careful about and how should we go about it?
Sincerely,
Augustus
In principle the main criteria would be whether the job requires a person with a masters or higher degree. If the company can prove that the job description and requirements match that for a person with masters then he would qualify. Again this is based on my awareness from reading various posts on the IV and similar websites. The attorney would be the best to decide. I know many of our friends in the IV have masters but the main problem they are facing is that the job description does not specify a masters. So the employer hesitates to reaply in EB2 catagory. If your husband fits in then I believe all he has to do is to file another 140 and port the PD of the EB3 application.
How frustating this can be, right? :(
2011 Silk Road--which stretched
GC_1000Watt
05-25 01:41 AM
Don't think you can do anything about PIMS its a hit or miss. i got my visa renewed 7th year in Feb a few weeks before DS 160 came in to play. It was fairly smooth infact I felt they were much more organized this time then in the past years. If I recall my appointment was for 9:15 am I reached outside the consulate at 9.00am. They had us and the groups that I can't recall the term but indian co's that had groups of their peeps attending visa interviews in separate lines. Have your passport, original 797 and fee receipt together while waiting and from then on the usual. I have never seen or used the Strips Lounge but then I am a local too so comfort level with that. Good Luck.
Thanks much!
Thanks much!
more...
BharatPremi
07-27 12:40 PM
Hi,
My I-94 which was issued 2 years ago in the port of entry got expired(this I-94 was based on my previous employer "ABC". I have applied for H1 extention and got my 797 extended with new I-94 recently with my new employer "XYZ".
My question is which I-94 details should I use while filing my 485. Obviously my labor was filed by "XYZ" company.
Regards
Kasi
tkasi,
I-94 is not associated with particular employer. Your I-94 only get changed when you travel out and come back again. Even with extesnion application , no matter through which employer, your I-94 number does not get changed if you have not travelled out of USA during the period. In any way you should mention your latest I-94 number what you have and provide teh copy along with 485 application.
Note: Please seek legal advise from authorized lawyer foryour immigration
need. This is just merely my opinion.
- BharatPremi
My I-94 which was issued 2 years ago in the port of entry got expired(this I-94 was based on my previous employer "ABC". I have applied for H1 extention and got my 797 extended with new I-94 recently with my new employer "XYZ".
My question is which I-94 details should I use while filing my 485. Obviously my labor was filed by "XYZ" company.
Regards
Kasi
tkasi,
I-94 is not associated with particular employer. Your I-94 only get changed when you travel out and come back again. Even with extesnion application , no matter through which employer, your I-94 number does not get changed if you have not travelled out of USA during the period. In any way you should mention your latest I-94 number what you have and provide teh copy along with 485 application.
Note: Please seek legal advise from authorized lawyer foryour immigration
need. This is just merely my opinion.
- BharatPremi
WeShallOvercome
12-26 12:10 PM
Hello all,
not sure if this topic has been touched before; if we have a i-485 application filed; do we qualify as:
1) non-permanent resident aliens
OR
2) non-resident aliens?
thanks
Filing I-485 makes you an 'adjustee' (Under Adjustment of Status).
But you continue to be a non-resident alien under AOS if you keep working on H1. If you switch to EAD/AP, you are just an Adjustee waiting for your status to be adjusted to that of a permanent resident.
not sure if this topic has been touched before; if we have a i-485 application filed; do we qualify as:
1) non-permanent resident aliens
OR
2) non-resident aliens?
thanks
Filing I-485 makes you an 'adjustee' (Under Adjustment of Status).
But you continue to be a non-resident alien under AOS if you keep working on H1. If you switch to EAD/AP, you are just an Adjustee waiting for your status to be adjusted to that of a permanent resident.
more...
tnite
08-03 11:40 PM
I received a NOID (Notice Of Intent Deny) from USCIS.
Reason: The Form I-693 is incomplete that there is no evidence that the required TB skin test has been conducted or any annotation from civil surgeon stating that this test was medically inappropriate. Therefore we are requesting that you submit a new form I-693 which indicates that the TB skin test has been administered along with the results.
I called the surgeon who did my medical exam in 2005, they said that during that time, the TB skin test is optional and they had done only x-ray test instead of skin test.
When I told the doctor about this NOID, he said they I can take only the skin test and they can attach the skin test result with the existing I-693 form and mail the sealed envelop to the USCIS.
Do you have any idea at what stage the NOID is issued? Am I close enough to get 485 approved?
Did anyone faced a similar situation like mine?
It doesn't matter when NOID is issued. All that matters is TB test, get it done as fast as possible.
Reason: The Form I-693 is incomplete that there is no evidence that the required TB skin test has been conducted or any annotation from civil surgeon stating that this test was medically inappropriate. Therefore we are requesting that you submit a new form I-693 which indicates that the TB skin test has been administered along with the results.
I called the surgeon who did my medical exam in 2005, they said that during that time, the TB skin test is optional and they had done only x-ray test instead of skin test.
When I told the doctor about this NOID, he said they I can take only the skin test and they can attach the skin test result with the existing I-693 form and mail the sealed envelop to the USCIS.
Do you have any idea at what stage the NOID is issued? Am I close enough to get 485 approved?
Did anyone faced a similar situation like mine?
It doesn't matter when NOID is issued. All that matters is TB test, get it done as fast as possible.
2010 gt;gt;Silk Road Tours
krishmunn
03-25 10:18 PM
Does this mean that if my salary is higher than the "prevailing wage" by more than $320, the employer can legally ask me to reimburse the $320 filing fee? I have searched very hard but could not find any memo/doc regarding this.
No. It should be greater of Prevailing or Actual wage. Actual wage is wage paid to people with same qualification/experience for similar position in your company. If there are no other employee with similar qualification/experience in similar position, actual wage is wage paid to you.
Also there are other restrictions like if you voluntarily agreed BEFORE joining, if it was a condition for employment etc.
All in all it is pretty difficult for employer to recover H1 related cost from employee (even Attorney fee ). Check this 20CFR655.731 - What is the first LCA requirement, regarding wages? (http://www.dol.gov/dol/allcfr/title_20/Part_655/20CFR655.731.htm)
Also, having a agreement which says that employee will need to repay H1 cost is illegal (Penalty clause) and not enforceable. CIS is more lenient on whcih cost employee can pay but DOL is more restrictive.
No. It should be greater of Prevailing or Actual wage. Actual wage is wage paid to people with same qualification/experience for similar position in your company. If there are no other employee with similar qualification/experience in similar position, actual wage is wage paid to you.
Also there are other restrictions like if you voluntarily agreed BEFORE joining, if it was a condition for employment etc.
All in all it is pretty difficult for employer to recover H1 related cost from employee (even Attorney fee ). Check this 20CFR655.731 - What is the first LCA requirement, regarding wages? (http://www.dol.gov/dol/allcfr/title_20/Part_655/20CFR655.731.htm)
Also, having a agreement which says that employee will need to repay H1 cost is illegal (Penalty clause) and not enforceable. CIS is more lenient on whcih cost employee can pay but DOL is more restrictive.
more...
cfan666666
06-22 03:45 PM
Thank you for the information,
according to this link:
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=b0f860a07706d010VgnVCM10000048f3d6a1RCR D&vgnextchannel=52a46c854523d010VgnVCM10000048f3d6a1 RCRD
There are many mailing addresses for TSC
USCIS TSC
P.O. Box 851983
Mesquite, TX 75185-1983
USCIS TSC
P.O. Box 850965
Mesquite, TX 751185-0965
USCIS TSC
PO Box 850919
Mesquite, TX 75185-0919
USCIS TSC
PO Box 851182
Mesquite, TX 75185-1182
USCIS TSC
PO Box 852685
Mesquite, TX 75185-2685
USCIS TSC
PO Box 852135
Mesquite, TX 75185-2135
USCIS TSC
PO Box 852135
Mesquite, TX 75185-2135
USCIS TSC
PO Box 279030
Dallas, TX 75227-9030
USCIS TSC
PO Box 851804
Mesquite, TX 75185-1804
Any idea for filing 485?
thank you and have a nice weekend.
according to this link:
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=b0f860a07706d010VgnVCM10000048f3d6a1RCR D&vgnextchannel=52a46c854523d010VgnVCM10000048f3d6a1 RCRD
There are many mailing addresses for TSC
USCIS TSC
P.O. Box 851983
Mesquite, TX 75185-1983
USCIS TSC
P.O. Box 850965
Mesquite, TX 751185-0965
USCIS TSC
PO Box 850919
Mesquite, TX 75185-0919
USCIS TSC
PO Box 851182
Mesquite, TX 75185-1182
USCIS TSC
PO Box 852685
Mesquite, TX 75185-2685
USCIS TSC
PO Box 852135
Mesquite, TX 75185-2135
USCIS TSC
PO Box 852135
Mesquite, TX 75185-2135
USCIS TSC
PO Box 279030
Dallas, TX 75227-9030
USCIS TSC
PO Box 851804
Mesquite, TX 75185-1804
Any idea for filing 485?
thank you and have a nice weekend.
hair The Silk Road Travel guide
thomachan72
05-12 09:53 AM
Dear All,
Could you please advise, if we can port eb3 to eb2.
My husband is working for the same employer for last 6 years. He has masters degree from US and he filed for his GC in 2004. In 2004, he had only 1 year experience. The lawyer said he does not qualify for Eb2 despite his US degree.
Now after 6 years, he had a job change within his company. He became a principal engineer from just an engineer. Could we port to EB2?
If yes, what should we be careful about and how should we go about it?
Sincerely,
Augustus
In principle the main criteria would be whether the job requires a person with a masters or higher degree. If the company can prove that the job description and requirements match that for a person with masters then he would qualify. Again this is based on my awareness from reading various posts on the IV and similar websites. The attorney would be the best to decide. I know many of our friends in the IV have masters but the main problem they are facing is that the job description does not specify a masters. So the employer hesitates to reaply in EB2 catagory. If your husband fits in then I believe all he has to do is to file another 140 and port the PD of the EB3 application.
How frustating this can be, right? :(
Could you please advise, if we can port eb3 to eb2.
My husband is working for the same employer for last 6 years. He has masters degree from US and he filed for his GC in 2004. In 2004, he had only 1 year experience. The lawyer said he does not qualify for Eb2 despite his US degree.
Now after 6 years, he had a job change within his company. He became a principal engineer from just an engineer. Could we port to EB2?
If yes, what should we be careful about and how should we go about it?
Sincerely,
Augustus
In principle the main criteria would be whether the job requires a person with a masters or higher degree. If the company can prove that the job description and requirements match that for a person with masters then he would qualify. Again this is based on my awareness from reading various posts on the IV and similar websites. The attorney would be the best to decide. I know many of our friends in the IV have masters but the main problem they are facing is that the job description does not specify a masters. So the employer hesitates to reaply in EB2 catagory. If your husband fits in then I believe all he has to do is to file another 140 and port the PD of the EB3 application.
How frustating this can be, right? :(
more...
belmontboy
05-22 07:35 PM
I want to apply labour with another employer based on future employment and when that labour get approved for how many days it is valid, can i apply I 140 for that labour .
Do i have to take transfer in order to apply for I 140 ?
Can two I 140 process parallel ?
Thanks for you all support..
Keep up the Good job
what is the rationale behind applying two I140's?
Do i have to take transfer in order to apply for I 140 ?
Can two I 140 process parallel ?
Thanks for you all support..
Keep up the Good job
what is the rationale behind applying two I140's?
hot Silk road trade prospers again
amitarora74
08-04 11:43 AM
anoopraj2010
you have been waiting for just 1 year. My wife(primary applicant) got her GC exactly 3 years back while i could not be approved due to pending name check. Then the whole thing retrogressed. Have been renewing AP/EAD since then.I know couple of other people in same boat. I think this is more common than you think
you have been waiting for just 1 year. My wife(primary applicant) got her GC exactly 3 years back while i could not be approved due to pending name check. Then the whole thing retrogressed. Have been renewing AP/EAD since then.I know couple of other people in same boat. I think this is more common than you think
more...
house mscomm, Silk+road
krishna_brc
07-11 05:47 PM
Thanks a lot for your valuable input.
But I beleive all the input you mentioned, would be applicable for all kind of employer (Bigger or smaller) and get the RFE for ability to pay. I would like to know if you join the real small emplyer (about 35 employee) would it necessarly cause any other postential issue and/or must be a chance of getting the RFE as joining the such a small employer?
Please let me know.
Thanks for all your input in advance.
I believe as long as you are getting paid a salary which is greater or equal to what was mentioned in Labor/140 you should be fine.
There will not be question of Ability to Pay as you will getting paid at the time of RFE and size of the company doesn't matter.
But I beleive all the input you mentioned, would be applicable for all kind of employer (Bigger or smaller) and get the RFE for ability to pay. I would like to know if you join the real small emplyer (about 35 employee) would it necessarly cause any other postential issue and/or must be a chance of getting the RFE as joining the such a small employer?
Please let me know.
Thanks for all your input in advance.
I believe as long as you are getting paid a salary which is greater or equal to what was mentioned in Labor/140 you should be fine.
There will not be question of Ability to Pay as you will getting paid at the time of RFE and size of the company doesn't matter.
tattoo The Silk Road was born.
diptam
08-30 04:58 PM
Babu,
Very few folks are like you ! Guys like you fight for a cause - i understand your point.
Please help us by requesting your GC Aspirant friends in this country to participate in DC Rally on Sep 18th Tuesday.
Hearty Congratulation once again on your GC.
Thanks,
Diptam
Dear friends
I'm very excited to say that I got my green card approved. Thank you for all of your support.
My status change will not change a bit of my support to IV. I will continue to contribute what I contribute now, until we are sucessful. I'm not successful, until everyone of you is not successful in pursuing your green card. I hope and pray that my stand will motivate non contributing friends to contribute.
Friends and folks, we did not have any organization to support ourselves. So far we had to take anything shoved upon us. But the emergence of IV changed all that. Contribute and support IV. Because IV is our voice!!!
thanks
babu
Very few folks are like you ! Guys like you fight for a cause - i understand your point.
Please help us by requesting your GC Aspirant friends in this country to participate in DC Rally on Sep 18th Tuesday.
Hearty Congratulation once again on your GC.
Thanks,
Diptam
Dear friends
I'm very excited to say that I got my green card approved. Thank you for all of your support.
My status change will not change a bit of my support to IV. I will continue to contribute what I contribute now, until we are sucessful. I'm not successful, until everyone of you is not successful in pursuing your green card. I hope and pray that my stand will motivate non contributing friends to contribute.
Friends and folks, we did not have any organization to support ourselves. So far we had to take anything shoved upon us. But the emergence of IV changed all that. Contribute and support IV. Because IV is our voice!!!
thanks
babu
more...
pictures Road Map
vin13
02-11 09:02 PM
This petition is asking for a proposal to move ahead in line for the Green Card process. This is not asking for any extra quota. So basically this is not going to reduce the queue. Just give priority to someone who buys a house.
Am i missing something?
I just feel we should be asking for more than move up the line.
Am i missing something?
I just feel we should be asking for more than move up the line.
dresses A map of Guittard#39;s route in
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
more...
makeup China Silk Road Map ( Gansu
whiteStallion
10-17 11:52 PM
If you open a company on EAD, you are eligible for any positions that pay by W2 right?
If you have an EAD, you can take up any job which pays by W2... Opening a company has nothing to do with it.
If you are opening a company and you do Corp to Corp with any other vendor or Consultancy, then they will pay your corporation...and you get paid. From your side that is business income and you can deduct your expenses.
If you have an EAD, you can take up any job which pays by W2... Opening a company has nothing to do with it.
If you are opening a company and you do Corp to Corp with any other vendor or Consultancy, then they will pay your corporation...and you get paid. From your side that is business income and you can deduct your expenses.
girlfriend Silk Road Map
dealsnet
02-27 09:33 AM
That is why US consulate is not giving visit visa to Indian youths 15-35 years of age.
They know, these guys will come here and work then marry a US citizen to remain legal.
So need legal entry is required, then remain illegal, without any problem, just marry a US citizen.
This is giving a problem to deserving visit visa applicants.
Thank you. I was going to reply to Dealsnet and state that, but you beat me to it.
On a side note, i was going to add that out of status itself does not determine the start of the clock, for the 3 and 10 year bans, .. that would be "unlawful stay" determined from the expiration of the date on the I-94 OR an administrative determination of unlawful stay based on when they discovered the out of status situation. However, for the above purposes [GC based on marriage], this point is moot.
They know, these guys will come here and work then marry a US citizen to remain legal.
So need legal entry is required, then remain illegal, without any problem, just marry a US citizen.
This is giving a problem to deserving visit visa applicants.
Thank you. I was going to reply to Dealsnet and state that, but you beat me to it.
On a side note, i was going to add that out of status itself does not determine the start of the clock, for the 3 and 10 year bans, .. that would be "unlawful stay" determined from the expiration of the date on the I-94 OR an administrative determination of unlawful stay based on when they discovered the out of status situation. However, for the above purposes [GC based on marriage], this point is moot.
hairstyles Silk Road China Map
jlander
January 7th, 2005, 02:59 PM
I take macro photographs of gems and jewelry to be sold on the Internet. Currently, I use a coolpix 5000 and get some pretty good photos from it. I use a light box and different light sources (fluorescent & incandescent) to capture color and color-changes in the gems.
I just bought a d70 and now need a good macro lens for it. I tried the promaster 100mm macro (I think it is the vivitar lens) and it didn't work to well for me. My 1:1 macro images are all under exposed and not as clear as I have seen. They are actually blurry when blown up 100% on my monitor. I use a good tripod and stopped down to f22 to increase depth of field. If I pull back a bit, the images get better, but then I don't have the magnification I need.
I take the photos on extra white laser printer paper and most of the time, use indirect 5000K fluorescent lighting in a light box. I don't understand why my 1:1 photos seem to be underexposed. The white paper looks gray and the gem is dark and dull. Photos taken with my coolpix 5000 look great. The background is white, and the gems are lively.
After my disappointment with the cheap promaster lens, I made the decision to purchase the Nikon 105 Micro, but when I called to order it (from expresscamera.com), they asked me why I was purchasing a 35mm lens for my digital camera. They suggested the Sigma 105mm EX DG lens and wanted to sell it to me for $650. They said that this sigma lens was better than the Nikon for digital cameras and that the Nikon would also take underexposed photos. This could be that they just didn�t want to sell me the Nikon lens for $500 and wanted to sell me a $400 sigma lens for $650.:mad:
I need a lens that will allow me to blow the photos up to 100% on my monitor and they will be clear and the gem needs to look like a gem and not a dark crystal.
I just bought a d70 and now need a good macro lens for it. I tried the promaster 100mm macro (I think it is the vivitar lens) and it didn't work to well for me. My 1:1 macro images are all under exposed and not as clear as I have seen. They are actually blurry when blown up 100% on my monitor. I use a good tripod and stopped down to f22 to increase depth of field. If I pull back a bit, the images get better, but then I don't have the magnification I need.
I take the photos on extra white laser printer paper and most of the time, use indirect 5000K fluorescent lighting in a light box. I don't understand why my 1:1 photos seem to be underexposed. The white paper looks gray and the gem is dark and dull. Photos taken with my coolpix 5000 look great. The background is white, and the gems are lively.
After my disappointment with the cheap promaster lens, I made the decision to purchase the Nikon 105 Micro, but when I called to order it (from expresscamera.com), they asked me why I was purchasing a 35mm lens for my digital camera. They suggested the Sigma 105mm EX DG lens and wanted to sell it to me for $650. They said that this sigma lens was better than the Nikon for digital cameras and that the Nikon would also take underexposed photos. This could be that they just didn�t want to sell me the Nikon lens for $500 and wanted to sell me a $400 sigma lens for $650.:mad:
I need a lens that will allow me to blow the photos up to 100% on my monitor and they will be clear and the gem needs to look like a gem and not a dark crystal.
mrsr
06-19 08:46 PM
guess u r talking abt varicella vaccine .. this need 30 day gap, we had MMR on one day itself
The only catch could be on the MMR. MMR needs two vaccinations. The two vaccines nmeed to have a 1 month gap. So if you take one and to medical exam, they will force you take the 2'nd one right there. Ofcourse they don't care about the gap since they want to make money
The only catch could be on the MMR. MMR needs two vaccinations. The two vaccines nmeed to have a 1 month gap. So if you take one and to medical exam, they will force you take the 2'nd one right there. Ofcourse they don't care about the gap since they want to make money
ItIsNotFunny
12-08 11:15 PM
If you believe me, just ignore and concentrate on real issues like Obama immigration panel, FOIA & AC21 action items.
Gave you green, it that helps :).
Somebody recently gave me a red dot for one of my posts, which is alright, but the person qualified it with a highly offensive Hindi expletive. The words are too obscene to be posted in open forum so I will refrain from reproducing them.
I want IV to reveal the name of the culprit, and ban him/her immediately. Failing which, I will have to evaluate other options to seek redress.
Needless to say, this whole dot mongering is seriously flawed and needs rethinking.
Gave you green, it that helps :).
Somebody recently gave me a red dot for one of my posts, which is alright, but the person qualified it with a highly offensive Hindi expletive. The words are too obscene to be posted in open forum so I will refrain from reproducing them.
I want IV to reveal the name of the culprit, and ban him/her immediately. Failing which, I will have to evaluate other options to seek redress.
Needless to say, this whole dot mongering is seriously flawed and needs rethinking.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น